Olin,
I bought metal washers with rubber seals laminated to one side at a local
hardware store and simply trimmed them to achieve the fit. My hope is that
the rubber aspect will seal out water, but I know this may be overkill
considering the location of the holes through the bodywork.
Ron
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Olin Brimberry
Sent: Saturday, August 07, 2010 5:01 PM
To: healeys@autox.team.net
Subject: [Healeys] "D" shaped washers for the fuel tank strap
Does anyone have an extra set of 2 of these washers. I took my tank
out and when putting the straps back on, I misplaced the washers.
These are the 2 that are D shaped so that it will fit against the
flange to the rear shoud.
Thanks,
Olin Brimberry
Raleigh, NC
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|