healeys
[Top] [All Lists]

[Healeys] BJ8 gearbox in a BN4

To: <ggilliam@usol.com>, <healeys@autox.team.net>
Subject: [Healeys] BJ8 gearbox in a BN4
From: S and T Miller <stmiller96@hotmail.com>
Date: Tue, 24 Aug 2010 09:01:47 -0400
Hi Gordy.  I did the same swap.  I put a BJ8 gearbox in my Longbridge BN4.  I
did it about 13 years ago, but from want I remember I used the BJ8 clutch.  I
used the center shift fiberglass tunnel and had to add a bit of metal (to the
tunnel) on both sides that connects to the floor.  Also the OD comes REAL
close to the frame at the rear of the gearbox.  I spaced the rear mounts up a
bit to help with clearance- rather then cutting and notching the frame.

The Millers
"British Car Nuts"

1957 Austin Healey 100-6 BN4 35299

1959 Austin Healey 100-6 BN4 77219

1964 MGB 40841

1960 Austin Healey Bugeye Sprite AN5 34351

"Always drive them, but remember each drive in an antique car is a test
drive."
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] BJ8 gearbox in a BN4, S and T Miller <=