healeys
[Top] [All Lists]

[Healeys] Fw: hand break

To: "AustinHealey List" <healeys@autox.team.net>
Subject: [Healeys] Fw: hand break
From: "Dick Matson" <medlabinc@msn.com>
Date: Mon, 13 Sep 2010 08:16:12 -0700
Richard:

Make sure the emergency brake pivot, the pivot which is located near the rear
end and that divides emergency brake cable action to the left and right side -
is  l-u-b-e-d.  It has a grease fitting and it must move freely.

Dick Matson / Bj8


----- Original Message -----
From: Richard Kahn<mailto:tahoehealey@hotmail.com>
To: lapierrem@sbcglobal.net<mailto:lapierrem@sbcglobal.net> ;
healeys@autox.team.net<mailto:healeys@autox.team.net>
Sent: Sunday, September 12, 2010 8:22 PM
Subject: Re: [Healeys] hand break


Thanks. I already have got the bushings and rubber trany mounts . I was
waiting for winter but now is opportune.




> From: lapierrem@sbcglobal.net<mailto:lapierrem@sbcglobal.net>
> To: tahoehealey@hotmail.com<mailto:tahoehealey@hotmail.com>;
healeys@autox.team.net<mailto:healeys@autox.team.net>
> Subject: Re: [Healeys] hand break
> Date: Sun, 12 Sep 2010 09:06:01 -0400
>
> Rich,  I  installed a new cable not too long ago,  going in through the
> trany cover made the job pretty
> straight forward.   While your at it you can clean up, derust, paint that
> area that is usually hidden away.
> Good job for the off driving season.
>
> Mark
>
> ----- Original Message -----
> From: "Richard Kahn"
<tahoehealey@hotmail.com<mailto:tahoehealey@hotmail.com>>
> To: <healeys@autox.team.net<mailto:healeys@autox.team.net>>
> Sent: Saturday, September 11, 2010 11:00 PM
> Subject: [Healeys] hand break
>
>
> > Well it turns out the cable broke at the front end. Tisi is going to be a
> > big
> > job cause every nut and screw and pin seem to be frozen. Thanks for the
> > input.
> > Rich Kahn
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>