healeys
[Top] [All Lists]

Re: [Healeys] AH100 Mean bearing caps needed

To: Thomas Willig <twillig@ruda.de>
Subject: Re: [Healeys] AH100 Mean bearing caps needed
From: John Harper <ah@jharper.demon.co.uk>
Date: Thu, 7 Oct 2010 17:53:43 +0100
Thomas

I don't have any spare caps but a colleague had the same problem. I had 
two old but recoverable blocks without caps and he had caps from two 
frost damaged blocks. The replacement caps had to be line bored as you 
say but in order to not disturb the accuracy of the crankshaft location 
his machinist first skimmed about 0.010" off each of the caps where they 
mate with the block. These were then fitted and the line boring was 
carried out in such a way as the cutter only 'kissed' the block but cut 
into the caps. Just to be on the safe side an extra small section of 
gasket material was added to the front and rear caps where the sump 
gasket would otherwise be possibly a little lacking in pressure.

Regards

>
>some time ago I bought a motor block for a AH100 were the main bearing
>
>caps were missing. I am thinking of using this block for a spare engine
>
>and wonder if someone can help me with these caps. I am totally aware
>
>that these caps have to be fitted to my block (line boring).  But it
>
>think it is still worthwhile. Maybe someone from the list had a cracked
>
>block and kept the caps...who knows<<<<<
>
>
>
>I am still looking. Please help.
>
>
>
>Best regards
>
-- 
John Harper
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>