healeys
[Top] [All Lists]

Re: [Healeys] I give up: how do I remove the differential drain

To: Danny Eskenazi <danny.eskenazi@gmail.com>
Subject: Re: [Healeys] I give up: how do I remove the differential drain
From: I Erbs <eyera3@gmail.com>
Date: Wed, 20 Oct 2010 10:28:09 -0700
Get some 7/8 square stock, use an open end spanner or socket on the bar and
turn as needed

It's Erbs
DIGS-4 Solutions
Please excuse Typos. Sent from my Droid cellular PDA
On Oct 20, 2010 10:25 AM, "Danny Eskenazi" <danny.eskenazi@gmail.com> wrote:
> Greetings,
>
> I replaced the front seal in my BT7's differential and I thought topping
it
> off would be the easy part. Turns out not so! Some googling has revealed
> that it is a 7/8" square drive plug. The only advice I've seen is to make
my
> own tool by grinding down a 1/2" drive extension to fit. Well, I don't
have
> a grinder. Surely there's an easier way? Doesn't SOMEONE make a tool for
> this?
>
> Thanks,
>
> -Danny
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/eyera3@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>