healeys
[Top] [All Lists]

Re: [Healeys] FW: I give up: how do I remove the differential drain

To: John Sims <ahbn6@verizon.net>, Healey List <healeys@autox.team.net>
Subject: Re: [Healeys] FW: I give up: how do I remove the differential drain
From: Jonas Payne <jpayne@ThorCon.net>
Date: Wed, 20 Oct 2010 12:50:48 -0700
Check your local hardware store in the plumbing and hvac tools section.  I'm
using a "key" that was designed for adjusting HVAC dampers for this purpose.
There is also a similar "key" that is utilized for plumbing valves.

Jonas Payne
PBR
Cell:   (702) 358-5084


-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of John Sims
Sent: Wednesday, October 20, 2010 12:46 PM
To: Healey List
Subject: [Healeys] FW: I give up: how do I remove the differential drain
plug?

These are on the market. I bought one several years go but do not remember
where. Since I almost always buy this type of thing from British Car
Specialists, I would start there.

John Sims, BN6
Aberdeen, NJ

http://www.healey6.com


-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Danny Eskenazi
Sent: Wednesday, October 20, 2010 1:25 PM
To: healeys@autox.team.net
Subject: [Healeys] I give up: how do I remove the differential drain plug?

Greetings,

I replaced the front seal in my BT7's differential and I thought topping it
off would be the easy part. Turns out not so! Some googling has revealed
that it is a 7/8" square drive plug. The only advice I've seen is to make my
own tool by grinding down a 1/2" drive extension to fit. Well, I don't have
a grinder. Surely there's an easier way? Doesn't SOMEONE make a tool for
this?

Thanks,

-Danny
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jpayne@thorcon.net

"This email and any attachments are confidential and intended solely for the
use of the individual or entity to whom they are addressed.  If you have
received this email in error please contact the sender(s) at (702) 269-2007
and delete all copies from your system.  It is not the intent of the sender to
solicit any person or business.  Please note that any opinions in this email
are solely those of the author and do not necessarily represent those of Thor
Construction, Incorporated.  Finally, the recipient should check this email
and any attachments for the presence of viruses.  The company accepts no
liability for any damage or loss caused by any virus transmitted by this
email."
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>