healeys
[Top] [All Lists]

Re: [Healeys] Axle - pan hard bushing?

To: Chris Dimmock <austin.healey@gmail.com>, john spaur
Subject: Re: [Healeys] Axle - pan hard bushing?
From: Alan Seigrist <healey.nut@gmail.com>
Date: Sun, 28 Nov 2010 10:30:46 +0800
Sorry for cornfusion, was thinking of hand-brake rod... Derp de derp...

On 11/28/10, Chris Dimmock <austin.healey@gmail.com> wrote:
> Alan,
> BJ8's don't have factory fitted panhard rods.......
> Chris
>
> Sent from my iPhone
>
> On 28/11/2010, at 11:42 AM, Alan Seigrist <healey.nut@gmail.com> wrote:
>
>> On my BJ8 it is oblong...
>>
>> On 11/28/10, john spaur <jmsdarch@sbcglobal.net> wrote:
>>> On top of the differential housing for my /62 BT7 there is a welded
>>> sheet metal eye. I believe it is for a rubber bushing that the pan
>>> hard rod passes through.
>>>
>>> Is this eye round or oblong?. Mine is oblong.
>>>
>>> Thank you,
>>> John Spaur
>>> ________________________________
>

-- 
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>