healeys
[Top] [All Lists]

Re: [Healeys] Extended Mirror Stem -- replacing

To: I Erbs <eyera3@gmail.com>
Subject: Re: [Healeys] Extended Mirror Stem -- replacing
From: Greg Mandas <gmandas@yahoo.com>
Date: Mon, 29 Nov 2010 15:21:30 -0800 (PST)
Gang,
OK, I went for it.  To get to the bracket inside the mirror which holds the
adjustable ball end of the stem in place I had to remove the glass from the
back.  It was held on with some sort of aging glue.  I plan on re-gluing it
with few dabs of silicone.
Thanks
Greg

--- On Wed, 11/24/10, I Erbs <eyera3@gmail.com> wrote:

From: I Erbs <eyera3@gmail.com>
Subject: Re: [Healeys] Extended Mirror Stem -- replacing
To: "Greg Mandas" <gmandas@yahoo.com>
Cc: healeys@autox.team.net, "KenFreese" <Ken.Freese@aerojet.com>
Date: Wednesday, November 24, 2010, 2:02 PM

I have the same mirror. Just don't drop/loose the screws. It comes apart with
no surprises.
Ira Erbs

Digs 4 Solutions

Computer Consultants

Portland, OR
On Nov 24, 2010 10:49 AM, "Greg Mandas" <gmandas@yahoo.com>
wrote:
> Ken,
>
> Maybe, I hope I don't have to remove the mirror. Sounds risky.

>
> I received one response saying to use this type of extension I needed an
> "older model mirror".
>
> Can anyone else comment on this?
>
> Greg
>
> --- On Wed, 11/24/10, Freese, Ken <Ken.Freese@Aerojet.com> wrote:

>
>> From: Freese, Ken <Ken.Freese@Aerojet.com>
>> Subject: RE: [Healeys] Extended Mirror Stem -- replacing
>> To: "Greg Mandas" <gmandas@yahoo.com>

>> Date: Wednesday, November 24, 2010, 12:36 PM
>>
>> Greg,
>> Did you ever get a response? If this is a BJ8 type mirror,
>> I am guessing you have to remove the glass. I wouldn't mind

>> having one of those as well.
>> Ken Freese
>> 65 BJ8
>>
>> -----Original Message-----
>> From: healeys-bounces@autox.team.net

>> [mailto:healeys-bounces@autox.team.net]
>> On Behalf Of Greg Mandas
>> Sent: Monday, November 15, 2010 4:27 PM
>> To: Healeys
>> Subject: [Healeys] Extended Mirror Stem -- replacing

>>
>> List
>>
>> I have a Cape International extended mirror stem which
>> raises the rear view mirror so I can see over the back seat.
>>
>>
>> The stem is attached to the mirror with a ball and socket

>> connection. There are two screws in the back of the mirror
>> which I have loosened but not removed.  I'm afraid if I
>> remove the screws completely the innards will fall inside
>> the mirror housing and I'll never get them back.

>>
>> Does anyone have experience with replacing the stem?
>>
>> If there are archive articles I'd appreciate the correct
>> keywords. I was unable to find anything.
>>

>> Thanks
>>
>> Greg
>> 65BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>