healeys
[Top] [All Lists]

[Healeys] Moss wire harness

Subject: [Healeys] Moss wire harness
From: sbyers at ec.rr.com (BJ8 Healeys)
Date: Sat, 15 Jan 2011 15:00:12 -0500
References: <4d3097d0.5989cc0a.6ec6.ffff9290@mx.google.com> <4D30AEF1.9010904@comcast.net> <SNT124-W439827AFD48FB071F4DF3EB5F20@phx.gbl> <AANLkTi=H3Xgmca9Db_tqT7b1+D4pW5LmAcTRVL=qD++Q@mail.gmail.com>
I bought my new wiring harness from British Wiring when they were still in
Illinois.  The company has since been sold to someone else in Pennsylvania,
but is still in business (http://www.britishwiring.com).
My harness was correct and exactly like original, including the bulb
sockets.  The only thing wrong was the wires in the steering column to the
turn signal switch were laid out to be the same color as the wires coming
out of the turn signal lights.  Actually, by the BMC wiring diagram the turn
signal wires go through a connector and change to a different color before
going to the switch.  This caused a bit of confusion before I figured out
what they had done.  When I told them about it, British Wiring said no one
had ever pointed it out before, which seems strange.  I have no idea if they
ever corrected that.
 
Steve Byers
HBJ8L/36666           
BJ8 Registry
Havelock, NC  USA
 
 
 
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net]
On Behalf Of Bob Johnson
Sent: Saturday, January 15, 2011 1:56 PM
To: Healeys
Subject: Re: [Healeys] Moss wire harness
 
Actually, now that it has been mentioned, the sockets for the
instruments was the only thing that was wrong. Must use the same
source.

Bob JOHNSON
bj8

>> Where it did fall short was with the sockets for the instrument bulbs.

>> the instruments.  I ended up using parts from my old harness to modify
_______________________________________________

<Prev in Thread] Current Thread [Next in Thread>