healeys
[Top] [All Lists]

Re: [Healeys] Rear wiring harness - fuel pump

To: john spaur <jmsdarch@sbcglobal.net>
Subject: Re: [Healeys] Rear wiring harness - fuel pump
From: David Nock <healeydoc@sbcglobal.net>
Date: Tue, 22 Mar 2011 16:36:36 -0700
The wire coming out of the harness going over to the fuel pump should  
not have a connector in it originally.





David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Mar 22, 2011, at 3:45 PM, john spaur wrote:

> I am installing the wiring and noticed that the fuel pump wire is  
> too short to reach the pump connection. I have a LHD BT7 with the  
> pump on the right side.
>
> The wiring diagram shows an in-line bullet connection that was used  
> to extend the wire to reach the pump. My harness was spliced to  
> extend the wire (it may have burned at one point because a green  
> wire was spliced onto the white wire.
>
> Would and in-line bullet connection be correct for extending the  
> wire to reach the pump or should a new harness be supplied with a  
> continuous wire of the correct length?
>
> Thank you,
> John
> '62 BT7
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>