Bob,
Just make up a new section of fuel line from the tank to the pump
with new original fittings. Or, you should be able to take the
fitting off of your existing line and put on the right fitting I
would think (without seeing it). I just made a new line using
stainless steel and original fittings which are soldered in place.
The only difficult part is the 90 degree elbow which you can't get
anymore. However there is a work around which you can get. British
Car Specialists has all the parts.
I had a machine shop drill out the old steel pipe from an original
elbow and used that.
John Spaur
San Jose, California
>>----- Original Message ----- From: "Bob Slater" <bj7healey at gmail.com>
>>To: "Healeys" <healeys at autox.team.net>
>>Sent: Friday, May 13, 2011 10:37 AM
>>Subject: Re: [Healeys] ...Fuel Tank...Part # 1
>>
>>
>>>Help
>>> Just purchased a new fuel tank for my BJ7 and the thread on the right
>>>angle fitting is not standard, I do not know what it is > I have to go from
>>>this compression fitting thread to gas line hose to the fuel pump so need
>>>some kind of an adapter ???
|