I forgot to add this to my last missive I sent out...
I removed (very carefully) my shroud to get to the underneath
stuff. When it came time to re-assemble some many months later I
pondered over what I should use to stick it down. Aggressive glue
would be a no-no as to remove it in the future would be almost
impossible. I found a perfect product! It sticks - but not
aggressively, molds but not too much, keeps soft and pliable but not
too much. After some 25 years the stuff left in the box is still
perfectly useable! It is Proform Dum Dum !! The maker is
Proform Products Ltd
430 Harrop Drive
Milton
Ontario L9T 3H2
It is great for leaky windscreens. You roll the stuff, which comes
in worm like strips, to a match stick thickness thread. Ease up the
rubber gasket around your glass, drop in the Dum Dum, press back the
rubber - and voila !!! No more leaks and it lasts forever. Also
blocks holes, cracks and substitutes for playdough !!!
At 12:11 AM 6/5/2011, I Erbs wrote:
>I used alumaweld to fill holes in my rear shroud. DPO drilled a bunch of
>holes in the boot floor. Worked great with map gas
>Ira Erbs
>IT Consultant
>Portland, OR
>
>sent from my Droid, please excuse typos and random self corrections because
>my phone has It's own ideas about what word I meant to write
>_______________________________________________
>Healeys@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/barrie@look.ca
Regards
Barrie
barrie@look.ca
705-721-9060
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|