healeys
[Top] [All Lists]

[Healeys] PCV valve

Subject: [Healeys] PCV valve
From: healeydoc at sbcglobal.net (David Nock)
Date: Wed, 1 Jun 2011 08:48:19 -0700
References: <a06200703ca0c07464418@[192.168.1.107]>
When installing a PCV valve you must supply it with manifold vacuum.  
Also you must block off the vent hole in the oil filler cap along  
with a seal on the dipstick.
We have a PCV valve that we have been supplying for many years along  
with the necessary fittings to install.





David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Jun 1, 2011, at 8:17 AM, Stephen Hutchings wrote:

> I wonder why the PCV valve can't be routed through the air cleaner,  
> that is, when it's already in place...I understand that Peter has  
> different air cleaners.
> I ask this because the article on John's site moves the ventilation  
> hose from the rear carb to the tapped hole in the block where the  
> brake servo usually connects , and I'm not certain why.
>
> Stephen, BJ8
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net

<Prev in Thread] Current Thread [Next in Thread>