Soak in some form of penetrating oil and use a screw extractor (Sears or Home
Depot)If that doesn't work, remove as much of the head as you can and pry the
parts apart. You can then remove what is left of the screw with a vice grip
and penetrating oil. Start by going in the tight direction a little first to
break the rust bond then the loose direction to remove.
Good luck
Rich Kahn
> From: eyera3 at gmail.com
> Date: Thu, 9 Jun 2011 10:26:13 -0700
> To: jmsdarch at sbcglobal.net
> CC: healeys at autox.team.net
> Subject: Re: [Healeys] windshield frame screws
>
> the issue is removing them, when the head snaps off, I will look for a tap.
> Thanks
>
> On Thu, Jun 9, 2011 at 10:22 AM, john spaur <jmsdarch at sbcglobal.net> wrote:
>
> > They appear to be 36 TPI, but check them with a screw or lightly with a
> > tap.
> >
> >
> > At 06:24 AM 6/9/2011 -0700, I Erbs wrote:
> >
> >> What is the size, pitch of the screws?
> >>
> >> Ira Erbs
> >> IT CONSULTANT
> >>
> >
> >
>
>
> --
> Ira Erbs
> IT CONSULTANT
> Portland, OR
>
> We can't solve problems by using the same kind of
> thinking we used when we created them.
> -Albert Einstein
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/tahoehealey at hotmail.com
|