healeys
[Top] [All Lists]

Re: [Healeys] shock bolts

To: Richard Kahn <tahoehealey@hotmail.com>, healeys@autox.team.net
Subject: Re: [Healeys] shock bolts
From: Alan Seigrist <healey.nut@gmail.com>
Date: Wed, 6 Jul 2011 06:09:05 +0800
Richard -

I tried all sorts of things and finally discovered that if I simply
tighten the nuts (with a spring washer underneath) to about 80-ft lbs
of torque or more (i.e. hella-tight) they'll never come loose.

Alan


On 7/6/11, Richard Kahn <tahoehealey@hotmail.com> wrote:
>  I have a clunk in the rear of my car. It has been there two years, since I
> replaced my rear shocks. The 1800 miles to Rendezvous made the problem
> worse.
> On inspection, the nuts holding the shocks were only hand tight. I am having
> a
> tough time keeping the rear shocks from coming loose on my BJ8. I have split
> ring lock washers on now but they keep needing to be tightened. I tried a
> second nut on each bolt a while ago but that does not work any better. Has
> any
> one tried a split rind lock washer on each side? How about star washers? I
> am
> sending one unit back cause the holes are too large.
> Thanks
> Richard Kahn
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>

-- 
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>