>Tadek,
>
>The cost about $36 each. The only cost difference was the shipping I
>paid to send them to the re-builder. It is a pressed bush but I
>could not find any from several sources when I looked. I would be
>very leery about putting in stiffer bushes because you would only
>archive a very small gain if anything at all. Stiffer bushes will
>transfer the energy to some other part of the car and you might end
>up with something else breaking. This happened to me when I put
>stiffer bushes in the A-arms.
>
>John
>
>At 10:27 PM 7/6/2011 +0700, you wrote:
>>John,
>>
>>Many thanks for the tips & the photos. Do you remember the cost?
>>
>>Could you taka a look at them and see if the rubber is actually moulded
>>(vulcanized) to the metal?
>>Best, Tadek
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|