healeys
[Top] [All Lists]

[Healeys] Bodywork question

Subject: [Healeys] Bodywork question
From: bspidell at comcast.net (Bob Spidell)
Date: Tue, 23 Aug 2011 16:11:22 +0000 (UTC)
Thanks, David. Just the tip I was looking for (hopefully the flange/bracket is 
reusable). 

Bob 

-------------------------------- 
Bob Spidell - San Jose, CA 

----- Original Message -----
From: "David Nock" <healeydoc at sbcglobal.net> 
To: "Bob Spidell" <bspidell at comcast.net> 
Cc: "healeylist" <healeys at autox.team.net> 
Sent: Tuesday, August 23, 2011 8:55:59 AM 
Subject: Re: [Healeys] Bodywork question 

Bob, on the original fender you will need to open up the crimped edge and 
remove the piece that attaches the fender to the hinge pillar. Then you can 
insert into the new section and pinch in place. 


The other option is I have the fender attachment plate that pinches in the 
fender and attaches to the hinge pillar for the 6 cylinder cars and could be 
modified for the 4 cylinder cars. 













David Nock 

British Car Specialists 

Stockton Ca 95205 

209-948-8767 




www.britishcarspecialists.com 

. 

. 


On Aug 22, 2011, at 8:41 PM, Bob Spidell wrote: 



The left front wing of our BN2 is pretty bunged-up. I got a repair panel from 
Kilmartin, which is overall pretty high quality. Problem is, the original has a 
(relatively) heavy flange about an inch in from the rear of the wing--for 
fitting to the front shut pillar--and the repair panel only has a 90deg bend at 
the very rear. Anyone fitted up these repair panels? All help, advice, 
sympathy, etc. accepted. 


TIA, 
Bob 


-- 
******************************************************************* 
Bob Spidell San Jose, CA bspidell at comcast.net 


******************************************************************* 
_______________________________________________ 
Healeys at autox.team.net 
Donate: http://www.team.net/donate.html 
Suggested annual donation $12.75 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc at 
sbcglobal.net 

<Prev in Thread] Current Thread [Next in Thread>