Hi Alan,
no, I am a traditionalist and use the original filter. I will check if
the ball in the Tecalemit housing seats properly. Nevertheless a very
interesting hint.....many thanks
Regards
Thomas
Von: Alan Seigrist [mailto:healey.nut at gmail.com]
Gesendet: Freitag, 2. September 2011 10:09
An: Thomas Willig
Cc: Healey List
Betreff: Re: [Healeys] Valve clatter when cold on 100
Thomas -
Did you put on a spin on oil filter adaptor? If so, you should use a
filter that has an anti-drainback valve. Fram PH43 is a number I know
offhand.
Sounds to me the oil galleries are running dry because the filter
doesn't have a drainback valve on it.
Try that.
Alan
On Fri, Sep 2, 2011 at 3:09 PM, Thomas Willig <twillig at ruda.de> wrote:
Since the complete rebuild of my engine I encounter a valve clatter
every time when starting the engine from cold. To be more precise,
"cold" means when the engine has stood overnight and has reached ambient
temperatures. After 30 seconds the clatter stops. It sounds like valve
clatter from one valve only. Any suggestions?
Regards
Thomas Willig
1956 BN2
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage <http://www.team.net/forums%0d%0aUnsubscribe/Manage>
: http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
|