When did they appear? My BN7 does not have one but I have one to install to
help with curing vapor lock on hot summer days intown driving. Problem is I
don't have enough thread on the carb fastener stud to add it without removing
a gasket.
Richard of KY
BN7 440
Regards, Richard C, via my Blackberry
-----Original Message-----
From: Oudesluys <coudesluijs at chello.nl>
Date: Sat, 24 Sep 2011 09:06:32
To: <mgcharlie at comcast.net>
Cc: <healeys at autox.team.net>
Subject: Re: [Healeys] Exhaust heat shield question
If you apply heat insulation do it on the outside, around the heat
source.
Insulation on the inside under the carpet is far less effective
as the heat
will be soaking in the metal of the body and be transmitted
over a larger
area.
Kees Oudesluijs
[demime 1.01d removed an attachment of type
text/x-vcard which had a name of coudesluijs.vcf]
_______________________________________________
Healeys at autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/gonnagitcha90 at hotmail.com
|