healeys
[Top] [All Lists]

Re: [Healeys] Pedal box and HD6 thermo choke

To: "'Chris Dimmock'" <austin.healey@gmail.com>
Subject: Re: [Healeys] Pedal box and HD6 thermo choke
From: "Rich Chrysler" <richchrysler@quickclic.net>
Date: Mon, 7 Nov 2011 11:24:55 -0500
Ah, Chris, but the diagonal steel gusseting that contains the pedal boxes
for either right or left hand drive cars are the same and that's what is
causing close clearance for Daniele.

Rich

-----Original Message-----
From: Chris Dimmock [mailto:austin.healey@gmail.com] 
Sent: 2011-11-07 9:22
To: Rich C
Cc: Daniele Ceccarelli; <healeys@autox.team.net>
Subject: Re: [Healeys] Pedal box and HD6 thermo choke

Of course, we (I'm using the the royal "we"), of the right hand drive  
persuasion, (the correct way these cars were designed and assembled),  
have no idea what you are talking about!!
There is no way that "we" can have our carbs interefere with "our"  
pedal boxes. And that's the way they were made.
Good clearance? Geez, they are on the other side of the engine!
At least they are in my Healey!
;-)
Ok?
Chris
www.myaustinhealey.com


Sent from my iPhone

On 07/11/2011, at 11:24 PM, "Rich C" <richchrysler@quickclic.net> wrote:

> Hello Daniele,
>
> The pedal box area on your BT7 should not be different than other  
> models
> until they got to the BJ8 where they formed a bit more clearance for  
> the air
> filter of the bigger HD8 carbs.
> If you have the stock twin carb HD6 setup with thermal choke  
> arrangement,
> there should be good clearance there when fitting things. If there  
> is not, I
> would suspect the engine mounts are either sagged and collapsed  
> through age
> or the engine mount assemblies may be reversed....left to right and  
> right to
> left. These are canted onto a slight angle and will certainly make a
> difference how the engine sits in the engine bay.
>
> Rich
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:healeys- 
> bounces@autox.team.net]
> On Behalf Of Daniele Ceccarelli
> Sent: 2011-11-07 4:05
> To: healeys@autox.team.net
> Subject: [Healeys] Pedal box and HD6 thermo choke
>
> Hello I'm a new member of mailing list. My name is Daniele and I'm
> restoring an AH 3000 BT7 MKI of 1959.
> Does anyone know if the pedal box was modified to install the HD6 carb
> with thermo choke? I ask that because I can't install my carbs.  When
> I disassemble the car I noticed that the pedal box in the point near
> the rear carb was just a little bit bent by some hammer blow (see the
> picture attach). During the body work we repair the pedal box but now
> I can't install the carbs. You think I should bent the pedal box
> again? Does anyone send me pictures of pedal box area of car with
> thermo choke system?
> Sorry for my terrible English.
>
> [demime 1.01d removed an attachment of type image/jpeg which had a  
> name of
> 00047.jpg]
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
>
> [demime 1.01d removed an attachment of type image/jpeg which had a  
> name of 3000 Rdstr Detail 0030.jpg]
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>