healeys
[Top] [All Lists]

Re: [Healeys] Steering wheel sticky

To: "'Carr&Edwards'" <scvc70@epix.net>, "'Healey list'"
Subject: Re: [Healeys] Steering wheel sticky
From: "David Porter" <frogeye@porterscustom.com>
Date: Mon, 28 Nov 2011 17:43:14 -0700
..all those years of pushing the car or braking and bracing yourself with
the steering wheel have pushed a nice ridge ring into the column splines
despite the big nut - that pretty much only keeps the SW from coming off the
shaft.
 So the problem (above) can only be overcome with a bit of finessed brute
strength, if that makes any sense.
 While gently rocking fore and aft, all 360 degrees (to push the splines
down again) and pulling (after a good dose of penetrant) with a fair amount
of force they will release. 
Dave

frogeye@porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

GO HERE: http://porterbikes.com/  nice pictures-fun facts-my world


-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Carr&Edwards
Sent: Monday, November 28, 2011 4:58 PM
To: Healey list
Subject: Re: [Healeys] Stearing wheel sticky

Wish we'd known this before we fought with mine -- would have made the job a

lot quicker!  (It finally came off--while we weren't around--after sitting 
for days with a tightened wheel puller on it plus liberal squirts of various

lubricants.)

Maybe a coating of wire-wheel anti-seize compound would be a good idea at 
reassembly?

Sarah Carr
BN1 in PA


----- Original Message ----- 
From: "David Nock" <healeydoc@sbcglobal.net>
To: "Eberhard Pietzsch" <mail@eberhard-pietzsch.de>
Cc: <healeys@autox.team.net>
Sent: Monday, November 28, 2011 11:12 AM
Subject: Re: [Healeys] Stearing wheel sticky


> This is a very common problem on the non adjustable steering column
> on all the Healeys. I have tried several pullers and non have been
> able to remove the wheel.  What will work is to use a large cresent
> adjustable wrench, open it up so that it fits over the steering
> column then use a large hammer to knock the wheel off hitting the
> side of the crescent wrench NOT the steering wheel.
>
> I have never seen why the wheel will not move but they are always
> that way.
>
>
>
>
> David Nock
> British Car Specialists
> Stockton Ca 95205
> 209-948-8767
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>