healeys
[Top] [All Lists]

Re: [Healeys] wrench for oil drain

To: <healey.nut@gmail.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] wrench for oil drain
From: Richard Kahn <tahoehealey@hotmail.com>
Date: Wed, 7 Dec 2011 22:28:09 -0800
Socket fits (sort of ) but the wrench is difficult to use with out a lift to
get enough room to get leverage.

> Date: Wed, 7 Dec 2011 19:26:05 +0800
> Subject: Re: [Healeys] wrench for oil drain
> From: healey.nut@gmail.com
> To: tahoehealey@hotmail.com; healeys@autox.team.net
>
> Rich -
>
> Are you sure?  I always get in there with a socket no problemo.
>
> You should use a 6 sided socket on a chewed up plug, or a Metrinch
> socket if they make one big enough.
>
> Alan
>
> On 12/7/11, Richard Kahn <tahoehealey@hotmail.com> wrote:
> > I have been chewing up the oil drain plugs using an adjustable wrench. I
> > cannot find a box end wrench that fits. A 28 mm is too large as is a 1
1/16
> > on
> > my chewed up old plug. There is little room for a socket wrench when the
car
> > is only up on jack stands. What are all of you using?
> > Thanks
> > Richard Kahn
> > _______________________________________________
> > Healeys@autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation  $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
> >
>
> --
> Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>