I bought a new switch however, I did replace the screw post for the
distributor wire with the one from the old switch because the
terminal screw is not correct on the new switches. The new rivets are
too then also.
John
>Date: Thu, 29 Dec 2011 13:56:38 -0700
>From: I Erbs <eyera3000@gmail.com>
>
>The terminal insulater crumbled on mine. I used thin, stiff plastic as a
>replacement. What have others used?
>
>Ira Erbs
>IT Consultant
>Portland, OR
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|