John
Just wipe down the block with metal prep. Prime and paint. No muss, no
fuss.
Aloha
Perry
-----Original Message-----
From: john spaur <jmsdarch@sbcglobal.net>
To: healeys <healeys@autox.team.net>
Sent: Mon, Jan 16, 2012 9:40 pm
Subject: [Healeys] Engine cleaning
I had my block cleaned at a machine shop and because I was not able
o paint it right away there is some light rust on the outside.
If I use soda to blast it away should I be concerned if some of the
oda gets into the oil galleries?
I can clean the galleries with solvent but I am curious to know if
he soda might harm the bearings once everything is back together.
Tank you,
ohn Spaur
an Jose, CA
uggested annual donation $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
Healeys@autox.team.net
ttp://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeyguy@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|