healeys
[Top] [All Lists]

Re: [Healeys] Coils again

To: llennep@verizon.net
Subject: Re: [Healeys] Coils again
From: Bob Spidell <bspidell@comcast.net>
Date: Sun, 12 Feb 2012 10:36:23 -0800
Pretty sure no Big Healeys came with ballast resistors originally (my BN2 and 
BJ8 don't have them).  Sounds like your 
BJ8, at least, is not stock; the coils need to be different in a ballasted 
system.

Bob


On 2/12/2012 9:48 AM, llennep@verizon.net wrote:
> Yes Bob that seems to be the case.  Both my BJ8 and BN7 have the spade type 
>although I am not sure the BN7 is correct as I had to drill holes in the 
>spades to attach the screw type connections on the replacement wiring harness. 
> The BJ8 has a resistor.
>
> The coil is neither pos or neg.  It does not kn ow what the system is as it 
>just puts stores and puts out a charge.
>
> Keith
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net

*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>