healeys
[Top] [All Lists]

[Healeys] Scuttle Seal question

Subject: [Healeys] Scuttle Seal question
From: jstmorris at yahoo.com (J. Scott Morris)
Date: Mon, 27 Feb 2012 12:08:38 -0800 (PST)
The instructions by Bill Bolton and notes from Rich Chrysler can be found on
Old Faithful - SOL.  See this link.
http://www.team.net/www/healey/tech/big_hly/rich_chrysler/ScuttleSeal.html

--Scott Morris; Simcoe, Ontario, Canada          - Keep Smiling, Murphy Lives

--- On Sun, 2/26/12, John Sims <ahbn6 at verizon.net> wrote:


From: John Sims <ahbn6 at verizon.net>
Subject: Re: [Healeys] Scuttle Seal question
To: "'Earl Kagna'" <kags at shaw.ca>, "'mark lapierre'"
<lapierrem at sbcglobal.net>, healeys at autox.team.net, "'Steve B. Gerow'"
<steveg at abrazosdata.com>
Received: Sunday, February 26, 2012, 7:38 PM


I'll take a copy.

John Sims, BN6
Aberdeen, NJ

http://www.healey6.com


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net]
On Behalf Of Earl Kagna
Sent: Sunday, February 26, 2012 7:32 PM
To: mark lapierre; healeys at autox.team.net; Steve B. Gerow
Subject: Re: [Healeys] Scuttle Seal question

Mark, Steve, Listers:

Mark is right - the instructions that came with the Bolton scuttle seals
(and originated way, way back with Don Mollett's Healey Motor Works in Santa
Barbara, CA - where Bolton got them when he bought Don out) make all the
difference to the success of the installation, regardless of whose seals are
used.

Fortunately I have a scan that I can send on to anyone that needs it - it's
in Word format, but I really should re-scan it to PDF (that is if I can find
the original sheet!)

I'll attach it here for Mark and Steve - the list strips attachments, so all
others will have to request a copy be e-mailed.

Earl Kagna
Victoria, B.C.
BJ8, BT7 tri-carb

-----Original Message-----
From: mark lapierre
Sent: Sunday, February 26, 2012 4:07 PM
To: healeys at autox.team.net ; Steve B. Gerow
Subject: Re: [Healeys] Scuttle Seal question

Hey Steve,   Did you get instructions from anyone?   The seals that Bill
Bolton offered fit well and came with instructions.   With out the  step by
step illustrations there is no way that
I could have figured out how to put those on correctly.

Mark

--- On Sun, 2/26/12, Steve B. Gerow <steveg at abrazosdata.com> wrote:


From: Steve B. Gerow <steveg at abrazosdata.com>
Subject: [Healeys] Scuttle Seal question
To: "healeys at autox.team.net" <healeys at autox.team.net>
Date: Sunday, February 26, 2012, 12:06 PM


Yesterday I had new Moss scuttle seals installed and am disappointed in how
they look. The "gutter" doesn't stay open but basically lies flat. There's
no way I can see these can be made to resemble the picture in
Anderson/Moment page 109.

Are there better ones available from other sources that anyone knows of?


--Steve Gerow
Altadena, CA
BN6

[demime 1.01d removed an attachment of type application/msword which had a
name of Scuttle Seals.doc]

<Prev in Thread] Current Thread [Next in Thread>