healeys
[Top] [All Lists]

[Healeys] Correct fuses

Subject: [Healeys] Correct fuses
From: healeyguy at bredband.net (Per Schoerner)
Date: Tue, 03 Apr 2012 02:13:25 +0200
References: <COL121-W37EE337CFE50571B9D5BF4A44C0@phx.gbl> <CACPMnYo33AwPKxz0gbYTmeSRx3e4M1Q1X04EK_ENPtRVgXZQ_g@mail.gmail.com>
Hi
You need to be a little careful here, do not put both head lamps on the 
same fuse. What happens if you are out in the dark and the fuse blows? 
Well, you might find yourself in the ditch.
Now that you have gone the relay route just connect the wires that feed 
the lamps via the relays to the thick wire coming from the battery, 
there is a connection point at the starter solenoid where the battery 
cable comes up from down under the car. Use as short and as thick cables 
as possible to avoid voltage drops. And as mentioned before, the head 
lamps are not fused originally.

Per in Sweden

I Erbs skrev 2012-04-03 01:38:
> Use inline fuses on both lamp circuits as well as the 35 amp oem fuse.
>
> Ira Erbs

<Prev in Thread] Current Thread [Next in Thread>