healeys
[Top] [All Lists]

Re: [Healeys] King pin shock arm interference

To: <jmsdarch@sbcglobal.net>, healeys <healeys@autox.team.net>
Subject: Re: [Healeys] King pin shock arm interference
From: richard mayor <mayorrichard@hotmail.com>
Date: Sat, 22 Sep 2012 00:35:25 +0000
Delivered-to: healeys-archive@autox.team.net
Delivered-to: healeys@autox.team.net
References: <6.2.3.4.2.20120921111814.0206a4a8@pop.att.yahoo.com> FILETIME=[28517CC0:01CD985A]
It sounds as if you have the upper trunion reversed.



> Date: Fri, 21 Sep 2012 11:24:28 -0700
> To: healeys@autox.team.net
> From: jmsdarch@sbcglobal.net
> Subject: [Healeys] King pin shock arm interference
>
> I installed rebuilt (possibly exchanged) shocks and rebuilt and
> reinstalled the king pins. I have adjustable bushings in the upper
> trunnion. I believe everything was installed correctly according to
> shop manual and I used a 2" distance piece at the shock arm before
> tightening all the bolts.
>
> However, the top of the king pin, above the castle nut, is hitting
> the shock arm just where the two arms come together near the pinch
> bolt. That is preventing the car from settling down to the correct ride
height.
>
> What would cause the king pint to hit the shock arm?
>
> Thank you,
> John Spaur
> '62 BT7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com
_______________________________________________
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys



<Prev in Thread] Current Thread [Next in Thread>