healeys
[Top] [All Lists]

Re: [Healeys] BJ8 Customized Radiator???

To: Robert Blair <rnbmail@yahoo.com>
Subject: Re: [Healeys] BJ8 Customized Radiator???
From: Oudesluys <coudesluijs@chello.nl>
Date: Mon, 29 Oct 2012 08:33:11 +0100
Cc: Healey List <healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <1351481502.54427.YahooMailClassic@web162902.mail.bf1.yahoo.com>
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:16.0) Gecko/20121010 Thunderbird/16.0.1
If you consider a custom radiator get the biggest cooling capacity that 
will fit. One can never have enough and it should give piece of mind 
under all circumstances. Do not forget to fit an overflow/expansion 
vessel and renew all hoses including the ones for the heater for silicon 
items. Check the condition of the heater radiator core. The engine 
temperature (sleeved thermostat 70C, 72C, 80C, 86C) can be chosen as you 
wish without the worry of overheating, 80C or 86C would be preferable, 
however do fit a proper thermostatically controlled electric fan with 
the switching on temperature about 95C and switching off temperature 
about 90C (for a 86C thermostat) and a 10psi rad cap to raise the 
boiling point.
Kees Oudesluijs



Op 29-10-2012 4:31, Robert Blair schreef:
> Listers,
>   
> I am considering a project that could involve replacing the std BJ8 radiator
> with a customized radiator - that is a different size/shape - probably
> somewhat wider and shorter in height.  The approx same area should be
> possible.  Better cooling efficiency would be a plus as that could allow a
> smaller area.
>   
> I have seen several Healeys with alloy rads - who makes them and who do you
> know in the US that does custom shape rads to order using normal cores?
>   
> Thx.
>
> Robert N. Blair
>    Yellow 65BJ8
>    RNBmail@yahoo.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>