Flat side to the pump (detent side to banjo bolt head). Note the new pumps
have a recess (detent) in the pump housing
for an O-ring (no fiber washer necessary/allowed).
The black fiber washers don't work as well as the older, orange/brown-colored
ones. You might try softening them up by
soaking in gas or light oil for a bit (you don't want them squishy, however).
Bob
On 11/25/2012 8:03 PM, Greg Mandas wrote:
> List,
>
> The fuel pump banjos have a flat side and s detent side. Am I right that the
> flat side goes next to the pump?
>
> Also, how do you get them to seal without crushing them? The fibre gaskets
> from Moss aren't sealing well.
>
> Greg
>
>
>
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|