The only sure way is using a vernier gauge, quick and easy.
Bodies can have another internal diameter than is stamped or cast on the
outside as a result of a rebuild or error from the manufacturer. These
are not as uncommon as one might think.
Kees Oudesluijs
NL
Op 5-1-2013 22:32, warthodson@aol.com schreef:
> I should have said the the information would be applicable to original Girling
> master cylinders. Who knows what you might find on reproductions!
> Gary
>
>
> -----Original Message-----
> From: john spaur <jmsdarch@sbcglobal.net>
> To: healeys <healeys@autox.team.net>
> Cc: healeys <healeys@autox.team.net>
> Sent: Sat, Jan 5, 2013 2:48 pm
> Subject: Re: [Healeys] master cylinders
>
>
> I have new Moss Classic Gold cylinders. No rings but they are stamped
> 0.625 leaving no doubt about the size.
>
> John Spaur
> San Jose, CA
>
> At 03:29 PM 1/5/2013 -0500, warthodson@aol.com wrote:
>> Pursuant to the recent discussion concerning how to identify master cylinder
>> sizes from the outside, .....
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/warthodson@aol.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2013.0.2805 / Virusdatabase: 2637/6009 - datum van uitgifte: 01/04/13
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|