Hi Ron, If you are using the Lempert gears, having just completed doing
2 of these I can tell you that you only need to follow the instructions
in the Healey workshop manual. The tolerances were excellent and only
took a little adjustment of the pinion preload shims, which was expected
with new bearings etc. Backlash was spot on without adjustment of the
spacers, and one of the 2 is now in a friends BJ8 and working fine. The
one for my car will take a little longer to see any use, lol
Cheers
Larry
http://www.acmefluid.com.au/larry/
On 10/01/2013 6:30 AM, Ron Mitchell wrote:
> Does anyone have a copy of Don Lenschow's article titled "Installation of new
> 3.55 gears into a Healey Differential".
>
> It is listed on the North Texas AHC Web Site Tech Tips page but doesn't come
> up when I click on the link.
>
> Ron Mitchell
> BN7
> BN6
> _______________________________________________
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|