Personally I wouldn't recommend imron. Although hard it chips very easily.
Por 15 is a much better product for a chasis or frame. Powder coat is also
super hard and won't chip
Pete
Sent from my Verizon Wireless 4G LTE Smartphone
----- Reply message -----
From: "John Vrugtman" <javrugtman@htcnet.org>
To: <healeys@autox.team.net>
Subject: [Healeys] imron paint
Date: Wed, Jan 30, 2013 9:22 am
This attribute of very hard paint is why I am planning on repainting the
chassis of my 64 with imron. The single stage urethane I had painted it with
did not hold up very well; especially with my gravel driveway. These days I
notice it is used mostly on trucks around here.
John
64/66 BJ8s
On 1/29/2013 11:28 PM, healeymanjim@hansencc.net wrote:
> i had a healey painted with imron back in the seventies when i was in
> alabama. i did not know diddly about body work so the paint showed every
> flaw as it was very shiny. it was very hard paint (used on airplanes mostly)
> and when it chipped there was not much i could do. my brother bought the car
> and he said it was a real bear to sand off the imron for repainting.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/javrugtman@htcnet.org
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|