If you are planning on running the car with 185 tyres and 5 inch rims or
more, then the spare wheel will not fit if you install the original block.
Derek
On Wed, Feb 6, 2013 at 10:05 PM, Per Schoerner <healeyguy@bredband.net>wrote:
> Simon
> As far as I remember all nut for the wooden blocks are welded on the other
> side. If your car is unmolested you can easily check the ones in the wheel
> house.
>
> Per
>
> Simon Lachlan skrev 2013-02-06 17:15:
>
>
> Seems to me that the block on the back bulkhead does not go into captive
>> bolts. Am I right? No nuts shown in parts book, but bolt seems to turn
>> without anything slackening off.
>>
> ______________________________**_________________
> Support Team.Net
> http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/derek.c.job@**gmail.com<http://autox.team.net/mailman/options/healeys/derek.c.job@gmail.com>
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|