Steve,
I am specifically looking for off-set bushings that are not "rock hard". If by
plastic you are referring to nylon or any other plastic that is not somewhat
compliant, that is not what I am looking for. If they are somewhat compliant &
off-set that is what I want.
Do you know which they are or can you give me a part #?
Gary
-----Original Message-----
From: Steve B. Gerow <steveg@abrazosdata.com>
To: healeys <healeys@autox.team.net>
Sent: Thu, Feb 7, 2013 3:39 pm
Subject: Re: [Healeys] off-set camber bushing sources
Suggest the offset plastic bushings offered by David Nock.
I'm using the Cape bronze/steel setup which required quite a bit of machining
to
get to fit right. Not recommended.
Never noticed any effect on the ride from this mod.
--
Steve Gerow
BN6
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/warthodson@aol.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|