healeys
[Top] [All Lists]

Re: [Healeys] Toe In

To: healeys@autox.team.net
Subject: Re: [Healeys] Toe In
From: Oudesluys <coudesluijs@chello.nl>
Date: Wed, 10 Apr 2013 12:14:28 +0200
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <COL127-W18CE498CDBE34A5CFC1A7BA4C70@phx.gbl>
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:17.0) Gecko/20130328 Thunderbird/17.0.5
Measure in degrees, as the equipment does in the tire shop, and forget 
inches.

If you really have to one could calculate the degrees from inches and 
visa versa, but you need to know the diameter of the rim and you need a 
sine table from high school days or, if you can work them, an 
appropriate calculator as needed in high school these days:

"Find the sine of the angle from the toe required per side/wheel 
(inches) divided by the diameter of the wheel rim (inches)

For example 1/16th inch total "toe-in" which is 1/32" per side = 0.03125"

Assuming a rim diameter of 15" (Taken from the internet).

Toe angle per side is sine of 0.003125/15 = 0.002083 equivalent to 
0.119366 degrees which is also 7.16 minutes.

Total toe-in is double the per side toe-in, in this case 14.32 minutes".

Cheers,
Kees Oudesluijs



Op 10-4-2013 3:49, Richard Kahn schreef:
> I had the front end aligned today on my BJ8. It was 1/2 degree toe in. I had
> previously measured 1/16 in with a jig I built. How does 1/2 degree relate to
> inches? It seems to track better with this "small" adjustment.
> Rich Kahn
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2013.0.3272 / Virusdatabase: 3162/6234 - datum van uitgifte: 04/09/13
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>