Hi Mike,
The dip stick tube is threaded into the block and should come out quite
easily.
They are frequently a little bent sometimes so much that they need to be
straightened to be unscrewed.
Michael S
On Mon, May 27, 2013 at 7:56 PM, Mike Tobin <ahbt71@gmail.com> wrote:
> This seems really stupid. Especially after having dsmantled the entire
> engine (except for this one part). How does the dip stick tube come out?
> It's a bit fragile and I rather have it off before sending the block to
> the machine shop. I'm afraid to break it off in its hole.
> Cheers,
> Mike Tobin
> Pepperell, Mass
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
--
Michael Salter
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|