Yes Curt is absolutely correct. The threads for the screws that hold the
frame to the posts are 10-32...NOT 10- 24 as I stated earlier. I have a set
that have 10-24 screws but they appear to have been retapped...
I believe all the 6 cyl roadsters use 10-24 for that job.
Michael S
On Wed, May 29, 2013 at 9:53 PM, Michael Salter <michaelsalter@gmail.com>wrote:
> HI Mike,
> I presume that you are asking about the screws that hold the chromed
> windshield frame channel to the aluminum side posts.
> I just removed a set of those from my early BN1 posts and they appear to
> be 10/24 countersink slots although as 3/16" Whitworth screws are also 24
> TPI there is a very good possibility that they BSW.
> The heads appear to be smaller than a standard countersink screw I guess
> to ensure that they do not contact the glass.
>
> Michael S
>
>
> On Wed, May 29, 2013 at 6:57 PM, rrengineer.mike
> <rrengineer.mike@att.net>wrote:
>
>> Does anyone know the type of 10-32 screw that fits a Bn1/2 windshield
>> frame to attach the side stantions?
>> Mike MacLean
>> 56 BN2
>>
>>
>> Sent via the Samsung Galaxy Sb " III, an AT&T 4G LTE smartphone
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>
>>
>
>
> --
> Michael Salter
>
>
--
Michael Salter
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|