Thanks,
Do you know hardness rating
Ira Erbs
Portland, OR
please excuse typos. Sent from my phone
On Aug 6, 2013 9:49 AM, "john spaur" <jmsdarch@sbcglobal.net> wrote:
> From the parts manual:
>
> 4 total; Bolt, clutch housing to rear plate HBZ0611 (1-3/8" x 3/8")
> 2 total; Dowel blot, clutch housing to rear plate AEC3487 (3/8", length
> not given but is has a longer and fatter unthreaded shoulder, installed at
> 11 and 5 o'clock I believe)
> 1 total; Bolt, clutch housing to rear plate HBZ0612 (1-1/2" x 3/8", at
> upper right hand top side of housing)
> 2 total; Bolt, starter to engine HBZ0615 (1-7/8" x 3/8")
>
> John
>
> At 03:56 AM 8/6/2013 -0700, I Erbs wrote:
>
>> I need the info on the bell housing to engine side of the the tranny,
>> including starter bolts.
>> Ira Erbs
>> Portland, OR
>> please excuse typos. S boltsent from my phone
>> ______________________________**_________________
>> Support Team.Net
>> http://www.team.net/donate.**html<http://www.team.net/donate.html>
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/**
>> options/healeys/jmsdarch@**sbcglobal.net<http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net>
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|