It is filled with either and the nut size is 5/8". Take it out and
plug the hole with a bolt for now but be sure your care does not over
heat because you will not have anyway of knowing it. The bulb seals
against a seat with pressure from the nut. Palo Alto Speedometer can
rebuild the gauge and supply a new bulb. If you have it rebuilt, the
copper tube is supposed to be zinc plated and you need to tell the
rebuilder this fact. I did not have mine plated.
At 05:05 PM 8/31/2013 -0700, I Erbs wrote:
>OK, I figured out why my water temp sender was leaking. The nut has been
>rounded off and I was never able to torque it enough to completely tighten
>the nut. So I guess my only option is to cut the capillary tube and use my
>special removal socket to get the damn thing out of the head.
>Question one: what will be released when I cut the tube?
>two, what is the best way to cut so it can be repaired?
>three. anyone have a working/rebuilt unit I can buy or borrow until mine is
>rebuilt. I'd love tro drive my car before the rainy season hits in earnest.
>
>Thanks
>
>Ira Erbs
>IT Teacher
>and Consultant
>
>Portland, OR
>
>*I spent a lot of money on booze, [women] and fast cars. The rest I just
>squandered.* English football star George Best,
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys@autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|