healeys
[Top] [All Lists]

Re: [Healeys] Thermostat Gasket

To: "Richard J. Hockert" <rjhco@att.net>, healeys <healeys@autox.team.net>
Subject: Re: [Healeys] Thermostat Gasket
From: richard mayor <mayorrichard@hotmail.com>
Date: Sun, 22 Sep 2013 00:39:54 +0000
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <000001ceb5ae$b5a94770$20fbd650$@att.net> FILETIME=[4204FBF0:01CEB72C]
The Z thermostat gasket is not the same.  The hole for the thermostat is the
same size but the distance between the bolt holes is about 1/8" (or more)
with the Healey gasket.  Which means you could use a Z gasket in a pinch if
you elongated the holes.



> From: rjhco@att.net
> To: healeys@autox.team.net
> Date: Thu, 19 Sep 2013 22:08:40 -0500
> Subject: [Healeys] Thermostat Gasket
>
> Does a 260 Z thermostat gasket fit the Healey 3000 engine?  I heard that
the
> fit is the same?
>
> Checked the archives and did not see any reference.  Thanks in advance.
>
> Best regards,
> Jim Hockert
> Dallas, TX
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>