Not a big deal to use a soldering gun to heat up the old ones and remove them
from the wires. Then solder them to the new harness.
Keith
On 10/09/13, Michael Salter wrote:
Sorry Tom, not well at all.
They have a diameter of 0.158" whereas the correct ones are 0.183" so the
commonly available ones are too small.
The originals were soldered on but most people now use the "crimp" type which
are virtually indistinguishable when installed.
M Motors sells them and the crimping tool.
Michael S
BN1 #174
-----Original Message-----
From: "Tom" <ah3000me@gmail.com>
Sent: b2013-b10-b09 4:17 PM
To: "Healey Mail List" <healeys@autox.team.net>
Subject: [Healeys] bullet connectors
While looking thru the goodies at our local hardware store, I noticed that
they sell bullet connectors with blue plastic bodies. Will those bullet
connectors work with our Healey's bullet connectors?
- Tom
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/llennep@verizon.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|