Hi Kenny,
The original door seal used an integral spring steel clip to secure it to
the metal flange.
>From my experience, a few years old now as I haven't purchased any from MM
recently, they used to sell a type of seal which had an aluminum strip
inside which is designed to clip onto the edges of the small steel clips
#249-795.
The idea is that you install the clips at intervals, I think they recommend
4" spacing, along the flange then push the seal onto the clips which hold
it on very securely, in fact, when properly installed, it is very difficult
to remove.
Michael S
BN1 #174
On Mon, Jun 9, 2014 at 10:02 AM, Kenny J <theswed@hotmail.com> wrote:
> Im finishing up the installation of my door seals. Can anyone explain how
> and
> where the door seal clips (Moss #249-795) are installed? Thanks
>
> Kenny
> 61 BT7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|