I think that's why it was loose. :(
Ray, I'm saving up for a valve cover
I Erbs
IT Educator and Consultant
sent from smartphone, so what you read, may not be what I meant to send.
On Jul 5, 2014 12:24 PM, "Ray Juncal" <healeyray@yahoo.com> wrote:
> Ira
> You probably already know that if you tighten the tin cover too much
> you deform it at the hold down bosses and wind up not putting any more
> pressure on the gasket face where you want it.
> Ray
>
>
> On Saturday, July 5, 2014 12:14 PM, I Erbs <eyera3000@gmail.com> wrote:
>
>
> Preliminary results indicate that if you actually tighten the valve cover
> nuts. You can quite substantialy cut down on oil spraying around the
> engine. I'll need drive her a bit more to see if this unorthodox approach
> actually works. Stay tuned.
>
> I Erbs
> IT Educator and Consultant
> sent from smartphone, so what you read, may not be what I meant to send.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeyray@yahoo.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|