There is a tapped steel plate behind the shut pillar, it can be reached
from inside the fender well.
John
BJ8s
On 10/14/2014 12:53 PM, Mike Garvey wrote:
> The door lock plate (Moss terms) on my BJ8 needs work: the round pin is worn
> and loose on its mount. I can buy a replacement lock plate; my question has
> to do with the anatomy of the fasteners inside what I think is called the
> "shut pillar". Before I remove the screws that hold the lock plate on, I
> want to be sure that they don't fall into some deep crevice.
> Advice welcome..
> Thanks, Mike
>
> Michael Garvey
> 1967 BJ8/38046
> Swampscott, MA
> _______________________________________________
> S
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|