Patrick,
Plywood on the kick panels and trim panels behind the seats for the BN1. BN2
used a composition board.
Seat bottom frames are wood and there is a thin ply strip around the lower
seat back. I have photos when Peter Svilans restored mine if you would like.
The door panel is also ply through the BN2.
Regards from the far north,
Richard
Sent from my iPad
> On Oct 25, 2014, at 7:35, "Patrick & Caroline Quinn" <p_cquinn@tpg.com.au>
wrote:
>
> G'day
>
>
>
> Mike Salter has very kindly sent me some words and photos of the small
> triangular piece of timber or wood that goes in the spare wheel recess of a
> 100.
>
>
>
> Thinking about it I thought I would enlarge on Mike's words to include all
> bits of timber in a 100.
>
>
>
> As far as I know a standard 100 has the following bits of timber.
>
>
>
> One piece directly under each sidescreen ferrel. (Four in total)
>
> One piece in each door for the inner door trim.
>
> Front of the soft top.
>
> Piece behind the dash grab handle
>
> Two pieces under each seat
>
> Piece in spare wheel recess
>
>
>
> I am sure I have missed some so would appreciate the advice of everyone who
> knows, plus the variations between the early BN1s through to the last BN2s.
>
>
>
> Many thanks.
>
>
>
> Patrick Quinn
>
> Blue Mountains, Australia
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/cynicbass@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|