healeys
[Top] [All Lists]

Re: [Healeys] Boot lid seal

To: s.hutchings@rogers.com, healeys@autox.team.net
Subject: Re: [Healeys] Boot lid seal
From: Larry Wendland <bighealey3k@aim.com>
Date: Wed, 22 Apr 2015 00:30:29 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
Stephen,  I see what your saying now.  It's been years since I changed my seal 
and will look at my lid tomorrow and let you know what I find. 

Larry
'67 BJ8



-----Original Message-----
From: Stephen Hutchings <s.hutchings@rogers.com>
To: Larry Wendland <bighealey3k@aim.com>; healeys <healeys@autox.team.net>
Sent: Tue, Apr 21, 2015 11:58 pm
Subject: Re: [Healeys] Boot lid seal


 
  
Thanks Larry, but I don't think you quite got my question.  
  
I know which side is glued to the lid, but the seal itself has a different 
profile at each edge.  
  
My attachment is a cross section showing the difference. So, which edge is on 
the outside of the lid, and which goes toward the inside?  
  
   
  
  
Stephen   
  
  
     
  
   
    
     
      
------------------------------------------------------------
       From: Larry Wendland <bighealey3k@aim.com>
 To: s.hutchings@rogers.com; healeys@autox.team.net 
 Sent: Tuesday, April 21, 2015 11:49 PM
 Subject: Re: [Healeys] Boot lid seal
      
     
     
     
     
     
-----Original Message-----     
From: Stephen Hutchings <     s.hutchings@rogers.com>     
To: healeys <     healeys@autox.team.net>     
Sent: Tue, Apr 21, 2015 8:56 pm     
Subject: [Healeys] Boot lid seal     
     
     
 Stephen, The concave side faces the lip of the shroud.  The lip     
contacts the seal in the center of the concave surface ideally.       
     
Larry     
'67     
BJ8     
      
      
     
     
      
      
        
Hello listers,        
        
I'm about to glue on the trunk or boot lid seal, and I see that the two edges 
are slightly different.          
        
        
As per my attachment, one side is more bulbous, and the other is sharper.      
  
        
So...which side faces in, and which side faces out?        
        
        
        
        
Thanks,        
        
Stephen, BJ8       
     
       
      
     
_______________________________________________Support 
Team.Nethttp://www.team.net/donate.htmlSuggested annual donation  
$12.75Archive:     
http://www.team.net/archiveForums:http://www.team.net/forumsHealeys@autox.team.nethttp://autox.team.net/mailman/listinfo/healeysUnsubscribe/Manage:http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com
     
      
       
      
     
     
     
    
    
   
  


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>