Why would you use oil on the plug threads and not anti-seize? Just asking,
Iâ??m not an expert..
Tricarb
Al
> On Apr 26, 2015, at 12:19 PM, John Spaur <jmsdarch@sbcglobal.net> wrote:
>
> Hi Larry,
>
> This is a link to the color chart I used. I think my plug color is close to
> #14. http://hpibajass.com/spark-plug-color/
>
> The carbon marks could be left over from the oil I used on the threads when I
> installed the plugs. I am curious about that too. tuning the car it was on
> the rich side; that might account for the carbon marks too.
>
> I am using Chevron with Techron because it is close to my house. 92 octane
> (R+M)/2. It is California winter or summer blend depending on the time of the
> year.
>
> Cheers,
> John Spaur
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/amalin@mac.com
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|