Re: [Healeys] Steering Box and Wire Wheel Questions--BJ8

[Per Schoerner <per@schoerner.se>]

Hi
On the other hand, when you have done all this you will find that it 
didn't help, it will still leak. It's because of that oil seal that 
doesn't prevent oil leaks. Magnus Karlsson helped me to put a proper oil 
seal in the box, and that helps. It involves using the lathe and enlarge 
the oil seal seat, so a modern seal will fit.
And while you're in there you should also replace the bush.

Best, Per

Michael skrev den 2015-06-14 23:15:

> Bottom line for me is spend the time removing the box which will allow
> you to do the seal replacement properly.
>
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys