healeys
[Top] [All Lists]

[Healeys] Adding Switches to a BT7

Subject: [Healeys] Adding Switches to a BT7
From: simon.lachlan at homecall.co.uk (Simon Lachlan)
Date: Sat, 4 Feb 2017 09:40:16 -0000
References: <CAA-dtXbOg=0K5ujfe9WS8QjWNYMSvJehMoYcoPpq=2XOU=7m9Q@mail.gmail.com>
You could make a small right-angled bracket and fasten it beneath the heater 
controls. You?ll be able to use the existing fasteners.

I?ve done that and found, coincidentally, that others have done the same.

Simon

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Mike Tobin
Sent: 04 February 2017 03:07
To: healeys at autox.team.net
Subject: [Healeys] Adding Switches to a BT7

 

Hey Y'all,

About ready to install and wire the dash on the BT7 and looking for ideas on 
how to add a couple switches without cutting any holes in the dash.

I'll be installing a DW safety steering column which has no stator tube so I 
need  homes for the indicators and the horn.  Thinking a two position switch 
and a momentary switch.

Thanks and Cheers,

Mike Tobin

Townsend, Montana

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170204/8dac0c46/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>